Tel No: +44 (0) 1429 836655

sales@fidgeon.co.uk

Family business suppling the Non-Destructive Testing Industry since 1975

Deutropuls Electromagnetic Yoke

£0.00
Product Code: F05.0510-F05.0511

Be the first to review this product

Availability: In stock

£0.00

Quick Overview

The DEUTROPULS Hand Yoke is a mobile yoke for magnetic particle inspection with extra magnetisation performance, easy handling and for miscellaneous applications. The robust design allows reliable magnetic particle crack detection also under harsh conditions. The mechanical design takes the highest safety demands into account. The instrument is fully sealed with high-quality casting resin against humidity. The optimal positioning onto the different work pieces is possible with the help of interchangeable extended, angled or flexible attachment poles respectively.


 


Available in two versions:

The 230 V AC version can be connected to the power supply system either directly or via an isolating transformer (230 V primary / 230 V secondary) for alvanic isolation. The 42 V AC version (low supply voltage is fed by an isolating transformer (order no. 3850.242) which is connected primary to 230 V and provides a secondary voltage of 42 V or 35 V respectively.


 


Every DEUTROPULS Hand Yoke is subjected to an earth conductor test and is high-voltage resistant. The 230 V version is protected against overheating by an integrated temperature sensor.


 


More features:



  • Weight optimized design with high magnetization performance

  • User-friendly shape with short travel switch

  • Resistant to high voltages and high dielectric strength

  • High-quality resin casted housing

  • Easily exchangeable cable

  • Replaceable switch, sealed according to IP65, very high switching stability

  • High duty cycle

  • Characteristics in compliance with DIN EN ISO 9934-3:2002, ASTM E1444-05


 


The new attachment poles ensure reliable magnetic particle testing through hot-dip galvanizing and thus permits testing in compliance with the DASt directive 022.

With the newly developed, geometrically optimized attachment poles of the hand yoke a field strength of more than 4 kA/m (40 A/cm) is achieved permitting magnetic particle testing of weld seams through the galvanizations. The magnetizing time and the post-magnetizing time is 6 seconds each. If required, available DEUTROPULS Hand Yokes can be retrofitted with these special attachment poles.

* Required Fields

£0.00

More Views

* Required Fields

£0.00

Details

The DEUTROPULS Hand Yoke is a mobile yoke for magnetic particle inspection with extra magnetisation performance, easy handling and for miscellaneous applications. The robust design allows reliable magnetic particle crack detection also under harsh conditions. The mechanical design takes the highest safety demands into account. The instrument is fully sealed with high-quality casting resin against humidity. The optimal positioning onto the different work pieces is possible with the help of interchangeable extended, angled or flexible attachment poles respectively.

 

Available in two versions:

The 230 V AC version can be connected to the power supply system either directly or via an isolating transformer (230 V primary / 230 V secondary) for alvanic isolation. The 42 V AC version (low supply voltage is fed by an isolating transformer (order no. 3850.242) which is connected primary to 230 V and provides a secondary voltage of 42 V or 35 V respectively.

 

Every DEUTROPULS Hand Yoke is subjected to an earth conductor test and is high-voltage resistant. The 230 V version is protected against overheating by an integrated temperature sensor.

 

More features:

  • Weight optimized design with high magnetization performance
  • User-friendly shape with short travel switch
  • Resistant to high voltages and high dielectric strength
  • High-quality resin casted housing
  • Easily exchangeable cable
  • Replaceable switch, sealed according to IP65, very high switching stability
  • High duty cycle
  • Characteristics in compliance with DIN EN ISO 9934-3:2002, ASTM E1444-05

 

The new attachment poles ensure reliable magnetic particle testing through hot-dip galvanizing and thus permits testing in compliance with the DASt directive 022.

With the newly developed, geometrically optimized attachment poles of the hand yoke a field strength of more than 4 kA/m (40 A/cm) is achieved permitting magnetic particle testing of weld seams through the galvanizations. The magnetizing time and the post-magnetizing time is 6 seconds each. If required, available DEUTROPULS Hand Yokes can be retrofitted with these special attachment poles.

Additional Information

Additional Accessories No
Product Code F05.0510-F05.0511

Details

The DEUTROPULS Hand Yoke is a mobile yoke for magnetic particle inspection with extra magnetisation performance, easy handling and for miscellaneous applications. The robust design allows reliable magnetic particle crack detection also under harsh conditions. The mechanical design takes the highest safety demands into account. The instrument is fully sealed with high-quality casting resin against humidity. The optimal positioning onto the different work pieces is possible with the help of interchangeable extended, angled or flexible attachment poles respectively.

 

Available in two versions:

The 230 V AC version can be connected to the power supply system either directly or via an isolating transformer (230 V primary / 230 V secondary) for alvanic isolation. The 42 V AC version (low supply voltage is fed by an isolating transformer (order no. 3850.242) which is connected primary to 230 V and provides a secondary voltage of 42 V or 35 V respectively.

 

Every DEUTROPULS Hand Yoke is subjected to an earth conductor test and is high-voltage resistant. The 230 V version is protected against overheating by an integrated temperature sensor.

 

More features:

  • Weight optimized design with high magnetization performance
  • User-friendly shape with short travel switch
  • Resistant to high voltages and high dielectric strength
  • High-quality resin casted housing
  • Easily exchangeable cable
  • Replaceable switch, sealed according to IP65, very high switching stability
  • High duty cycle
  • Characteristics in compliance with DIN EN ISO 9934-3:2002, ASTM E1444-05

 

The new attachment poles ensure reliable magnetic particle testing through hot-dip galvanizing and thus permits testing in compliance with the DASt directive 022.

With the newly developed, geometrically optimized attachment poles of the hand yoke a field strength of more than 4 kA/m (40 A/cm) is achieved permitting magnetic particle testing of weld seams through the galvanizations. The magnetizing time and the post-magnetizing time is 6 seconds each. If required, available DEUTROPULS Hand Yokes can be retrofitted with these special attachment poles.

Additional Information

Additional Accessories No
Product Code F05.0510-F05.0511

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  • Rohmann
  • Fujifilm
  • Johnson Allen
  • Chemetall
  • Magnaflux
  • Colenta
  • Tracerco
  • Gal Gage Co.
  • Tetenal
  • Radiographic Accessories Limited
  • Vertec
  • High Technology Sources Limited
  • Phoenix Inspection Systems Limited
  • AGFA
  • Wolf Safety Lamp Company
  • X-Rite
  • Balteua NDT
  • Karl Deutsch
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x