Tel No: +44 (0) 1429 836655

sales@fidgeon.co.uk

Family business suppling the Non-Destructive Testing Industry since 1975

EloWheel Eddy Current Wheel Inspection System

£0.00
Product Code: F20.0922

Be the first to review this product

Availability: In stock

£0.00
OR

Quick Overview

Eddy Current Aircraft Wheel Inspection System optimized for:
• Surface inspection
• Inspection for hidden cracks
• Conductivity measurement
• Bore hole inspection


General
With the RPT wheel inspection systems ROHMANN GmbH provides the operator with a modern and future-oriented system for the inspection of wheels (aircraft wheels and comparable components) that will also fulfil future requirements regarding the safety and the scope of the wheel inspection. The operator places the wheel half that is to be inspected onto the turntable and fastens it with a pneumatic clamping device. He then selects the corresponding wheel type from a list and completes the information by adding the serial number of the wheel half that is to be inspected. He then triggers the automatic inspection procedure that may consist of these tasks:
• automatic detection of surface cracks
• automatic inspection for hidden defects
• manual conductivity measurement
• manual bore hole inspection
The corresponding settings of the test instrument are automatically changed. The operator evaluates the results during or after the inspection. This evaluation along with the test results is saved and may be reproduced at any time in the future. If desired, test logs may be printed. Storing all test results in a database makes for easy access to prior inspections of the same wheel.


Scope of inspection
Surface inspection
• Sliding differential aircraft wheel probe featuring approximately 10mm (0.39”) active area (optional with ceramic wear protection)
• Area of inspection all the was to the end of the bead seat radius
• Reference defect depth 0.76mm (0.003”) x length 1.52mm (0.059”) x width 0.1mm (0.004”); EDM, tangentially and axially oriented.


Inspection of hidden cracks
• Sliding absolute aircraft wheel probe (combined with the surface probe)
• Area of inspection up to the beginning of the bead seat radius
• Reference defect approx. 30% damage to the wall thickness from the inside
• Depending on the structure


Option conductivity measurement 
• Absolute conductivity probe as manual probe
• Measuring range conductivity: 0.5 IACS to 110 IACS
• Measuring uncertainty conductivity: ±1.0% of the measured value/±0.5 IACS (The greater value applies.)


Option bore hole inspection
• Hand-hand rotor with encoder for the manual bore hole inspection
• Graphic online display of each bore hole as a separate C-scan
• Reference defect 0.5mm (0.019”) x 2mm (0.078”) EDM


Aircraft Wheel dimensions
• Two basic systems featuring turntables with diameters of 600mm (23.62”) and 900mm (35.43”) are offered.
• Overall height: 45mm – approx. 500mm (1.77” – 19.68”)
• Diameter: 100mm – 600mm (resp. 900mm) (3.93 – 23.62“ resp. 35.43“)
• Weight: < 200kg (resp. 250kg) (440.92lbs resp. 551.15lbs)
• Bore holes: ø 5mm – 20mm (0.19 – 0.78”)
• Duration of the inspection for the automatic inspection procedure: approx. 30sec to 1.5min


System components
• Test stand with turn table and pneumatic wheel centering device
• Combined HF-/LF-probe
• Optional conductivity probe
• Optional rotor with interchangeable rotating probes
• ELOTEST IS500 eddy current test instrument
• System PC featuring Windows 7 Professional operating system
• Optional printer for the test logs
• Optional light protective grid


General technical data
• Ambient temperature: 10 – 40°C (49.99° – 104° F)
• Rel. humidity: 5 – 80%
• Required space: approx. 850 x 2200 x 1450mm (W x D x H) (33.64 x 86.61 x 57.08”) resp. 1200 x 2200 x 1600mm (47.24 x 86.61 x 62.99”)
• Elektr. connection: 250V/ 1kVA
• Compressed air: min. 6 bar, 1/4”, cleaned, dry

More Views

Details

Eddy Current Aircraft Wheel Inspection System optimized for:
• Surface inspection
• Inspection for hidden cracks
• Conductivity measurement
• Bore hole inspection

General
With the RPT wheel inspection systems ROHMANN GmbH provides the operator with a modern and future-oriented system for the inspection of wheels (aircraft wheels and comparable components) that will also fulfil future requirements regarding the safety and the scope of the wheel inspection. The operator places the wheel half that is to be inspected onto the turntable and fastens it with a pneumatic clamping device. He then selects the corresponding wheel type from a list and completes the information by adding the serial number of the wheel half that is to be inspected. He then triggers the automatic inspection procedure that may consist of these tasks:
• automatic detection of surface cracks
• automatic inspection for hidden defects
• manual conductivity measurement
• manual bore hole inspection
The corresponding settings of the test instrument are automatically changed. The operator evaluates the results during or after the inspection. This evaluation along with the test results is saved and may be reproduced at any time in the future. If desired, test logs may be printed. Storing all test results in a database makes for easy access to prior inspections of the same wheel.

Scope of inspection
Surface inspection
• Sliding differential aircraft wheel probe featuring approximately 10mm (0.39”) active area (optional with ceramic wear protection)
• Area of inspection all the was to the end of the bead seat radius
• Reference defect depth 0.76mm (0.003”) x length 1.52mm (0.059”) x width 0.1mm (0.004”); EDM, tangentially and axially oriented.

Inspection of hidden cracks
• Sliding absolute aircraft wheel probe (combined with the surface probe)
• Area of inspection up to the beginning of the bead seat radius
• Reference defect approx. 30% damage to the wall thickness from the inside
• Depending on the structure

Option conductivity measurement 
• Absolute conductivity probe as manual probe
• Measuring range conductivity: 0.5 IACS to 110 IACS
• Measuring uncertainty conductivity: ±1.0% of the measured value/±0.5 IACS (The greater value applies.)

Option bore hole inspection
• Hand-hand rotor with encoder for the manual bore hole inspection
• Graphic online display of each bore hole as a separate C-scan
• Reference defect 0.5mm (0.019”) x 2mm (0.078”) EDM

Aircraft Wheel dimensions
• Two basic systems featuring turntables with diameters of 600mm (23.62”) and 900mm (35.43”) are offered.
• Overall height: 45mm – approx. 500mm (1.77” – 19.68”)
• Diameter: 100mm – 600mm (resp. 900mm) (3.93 – 23.62“ resp. 35.43“)
• Weight: < 200kg (resp. 250kg) (440.92lbs resp. 551.15lbs)
• Bore holes: ø 5mm – 20mm (0.19 – 0.78”)
• Duration of the inspection for the automatic inspection procedure: approx. 30sec to 1.5min

System components
• Test stand with turn table and pneumatic wheel centering device
• Combined HF-/LF-probe
• Optional conductivity probe
• Optional rotor with interchangeable rotating probes
• ELOTEST IS500 eddy current test instrument
• System PC featuring Windows 7 Professional operating system
• Optional printer for the test logs
• Optional light protective grid

General technical data
• Ambient temperature: 10 – 40°C (49.99° – 104° F)
• Rel. humidity: 5 – 80%
• Required space: approx. 850 x 2200 x 1450mm (W x D x H) (33.64 x 86.61 x 57.08”) resp. 1200 x 2200 x 1600mm (47.24 x 86.61 x 62.99”)
• Elektr. connection: 250V/ 1kVA
• Compressed air: min. 6 bar, 1/4”, cleaned, dry

Additional Information

Additional Accessories No
Product Code F20.0922

Details

Eddy Current Aircraft Wheel Inspection System optimized for:
• Surface inspection
• Inspection for hidden cracks
• Conductivity measurement
• Bore hole inspection

General
With the RPT wheel inspection systems ROHMANN GmbH provides the operator with a modern and future-oriented system for the inspection of wheels (aircraft wheels and comparable components) that will also fulfil future requirements regarding the safety and the scope of the wheel inspection. The operator places the wheel half that is to be inspected onto the turntable and fastens it with a pneumatic clamping device. He then selects the corresponding wheel type from a list and completes the information by adding the serial number of the wheel half that is to be inspected. He then triggers the automatic inspection procedure that may consist of these tasks:
• automatic detection of surface cracks
• automatic inspection for hidden defects
• manual conductivity measurement
• manual bore hole inspection
The corresponding settings of the test instrument are automatically changed. The operator evaluates the results during or after the inspection. This evaluation along with the test results is saved and may be reproduced at any time in the future. If desired, test logs may be printed. Storing all test results in a database makes for easy access to prior inspections of the same wheel.

Scope of inspection
Surface inspection
• Sliding differential aircraft wheel probe featuring approximately 10mm (0.39”) active area (optional with ceramic wear protection)
• Area of inspection all the was to the end of the bead seat radius
• Reference defect depth 0.76mm (0.003”) x length 1.52mm (0.059”) x width 0.1mm (0.004”); EDM, tangentially and axially oriented.

Inspection of hidden cracks
• Sliding absolute aircraft wheel probe (combined with the surface probe)
• Area of inspection up to the beginning of the bead seat radius
• Reference defect approx. 30% damage to the wall thickness from the inside
• Depending on the structure

Option conductivity measurement 
• Absolute conductivity probe as manual probe
• Measuring range conductivity: 0.5 IACS to 110 IACS
• Measuring uncertainty conductivity: ±1.0% of the measured value/±0.5 IACS (The greater value applies.)

Option bore hole inspection
• Hand-hand rotor with encoder for the manual bore hole inspection
• Graphic online display of each bore hole as a separate C-scan
• Reference defect 0.5mm (0.019”) x 2mm (0.078”) EDM

Aircraft Wheel dimensions
• Two basic systems featuring turntables with diameters of 600mm (23.62”) and 900mm (35.43”) are offered.
• Overall height: 45mm – approx. 500mm (1.77” – 19.68”)
• Diameter: 100mm – 600mm (resp. 900mm) (3.93 – 23.62“ resp. 35.43“)
• Weight: < 200kg (resp. 250kg) (440.92lbs resp. 551.15lbs)
• Bore holes: ø 5mm – 20mm (0.19 – 0.78”)
• Duration of the inspection for the automatic inspection procedure: approx. 30sec to 1.5min

System components
• Test stand with turn table and pneumatic wheel centering device
• Combined HF-/LF-probe
• Optional conductivity probe
• Optional rotor with interchangeable rotating probes
• ELOTEST IS500 eddy current test instrument
• System PC featuring Windows 7 Professional operating system
• Optional printer for the test logs
• Optional light protective grid

General technical data
• Ambient temperature: 10 – 40°C (49.99° – 104° F)
• Rel. humidity: 5 – 80%
• Required space: approx. 850 x 2200 x 1450mm (W x D x H) (33.64 x 86.61 x 57.08”) resp. 1200 x 2200 x 1600mm (47.24 x 86.61 x 62.99”)
• Elektr. connection: 250V/ 1kVA
• Compressed air: min. 6 bar, 1/4”, cleaned, dry

Additional Information

Additional Accessories No
Product Code F20.0922

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  • Rohmann
  • Fujifilm
  • Johnson Allen
  • Chemetall
  • Magnaflux
  • Colenta
  • Tracerco
  • Gal Gage Co.
  • Tetenal
  • Radiographic Accessories Limited
  • Vertec
  • High Technology Sources Limited
  • Phoenix Inspection Systems Limited
  • AGFA
  • Wolf Safety Lamp Company
  • X-Rite
  • Balteua NDT
  • Karl Deutsch
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x