Tel No: +44 (0) 1429 836655

sales@fidgeon.co.uk

Family business suppling the Non-Destructive Testing Industry since 1975

GE (Krautkramer) DMS GO

£1.00
Product Code: F25.0126

Be the first to review this product

Availability: In stock

£1.00

Details


DMS Go Thickness Gauge

The DMS Go from GE’s Inspection Technologies business is a high-end thickness gauge which combines an innovative, easy-to-use user interface, powerful data management and an ability to provide accurate, reliable and comprehensive thickness inspection data. It is ideally suited for a wide range of applications including measuring for corrosion in the oil and gas sector and in power generation.

High Performance Thickness Measurement
High measurement stability and reliability resulting from zero crossing measurement technique.
Automatic gain control for excellent repeatability and corrosion monitoring
Built-in temperature compensation algorithm allows accurate measurement up to 540 deg C (1000 deg F).
Multiple Calibration and Zeroing modes for repeatable accuracy, including:
2-point calibration
1-point calibration with Manual on-block zeroing
1-point calibration with Auto zeroing for every measurement (coupled)
1-point calibration with User zeroing in the air (uncoupled)
Multiple measurement modes, for every application, including:
A-Scan
Thickness
B-Scan
Min /Max
Differential
Support of several standard probes and the capability to support virtually any probe using the custom probe setup feature
Ability to operate in harsh environments with IP67 sealing

High Capacity Data Recorder and Compatibility with Powerful Data Management Systems
The DMS Go offers powerful data recording and data management capability to meet the most demanding of thickness gauging and corrosion inspections. Important features include:

Powerful on-board data recorder has capacity of hundreds of thousands readings and permits the storage of A-scan, B-scan and MicroGRID attachments to thickness readings.
Data can be organized using pre-set (linear, grid, boiler), custom (custom linear, custom grid) or advanced (3D and 4D in UltraMATE) files structures.
Data transfer is via industry standard removable SD card up to 16 GB.
A USB port is included to allow instrument to PC connection if preferred – no driver needed, works with all versions of Windows.
Export in different file formats (xls, html, dat, csv, pdf ) to allow easy integration with user data management softwares and user quality control systems.
Compatible with UltraMATE and UltraMATE lite data management programs to allow for comprehensive analysis and documentation of data.
The data recorder files can be interfaced with other 3rd party software programs using a GEsoftware development kit, supplied on CD.

Intelligent Storing and Managing
The DMS 2’s on-board Data Recorder makes all the options for up-to-date documentation and modern data management available to you:

Memory capacity for 150,000 readings and 1,100 A- or B-scans (extendable)
Flexible adaptation to the measurement task by eight different file structures – according to the arrangement of measuring points most often encountered.
Subsequent insertion/deletion of readings within a file
Storage of additional information for each measurement location: probe, material velocity, date, time, calibration, etc.
Comment line with 64 characters accessible at any time.
Microgrid: You can insert up to 81 readings, in 2 x 2 to 9 x 9 grids, per measurement point at any time during the test using this function. By doing this, an analysis can be made in the direct vicinity of a critical measurement
point.

Display   

WVGA Color LCD with adjustable LED Backlight

Active Area   W: 108 mm (4.25")  H: 64.8 mm (2.55")

Screen Diagonal   5.0"

Pixel Resolution   W x H: 800 x 480 pixels

Environment  

Languages English, German, French, Spanish, Chinese and Japanese
 
Size : 175 mm x 111 mm x 50 mm (6.8" x 4.3" x 1.9")
 
Weight : 870 g (1.9 lb) with the battery
 
Temperature Shock (Storage) : 3 cycles: 4 hrs at –20 degC (-4 degF) to 60 degC (140°F), 4 hrs at 60 degC (140 degF), Transitions within 5 minutes, MIL-STD-810E Method 503.4, Procedure II

Vibration : MIL-STD-810E method 514.5, Procedure I,Annex C, Figure 6, General Exposure: 1 hr each Axis 

Shock-6 cycles each Axis, 15 g, 11 ms Half Sine, MIL-STD-810E Method 516.5, Procedure I

Loose Cargo : (In Shipping Container) MIL-STD-810E Method 514.5, Procedure II

Transit Drop : (Packaged for Shipment) MIL-STD-810E Method 516.5, Procedure IV, 26 drops

Operating Temperature Range : 0 degC to 55 degC (32 to 131degF)

Storage Temperature Range : -20 degC to 60 degC (-4 to 140  degF) with battery, 24 hrs

Dustproof / Waterproof : As per IEC 529 Specification for IP67 Classification

Hazardous Atmosphere Operation : As defined by MIL-STD-810E, Method 511.3, Procedure 1

Compliance

EMC/EMI : EN 55011 & EN61000-6-2:2001

Ultrasound : EN 15317, EN12668 , ASTM-E1324, ASTM-E317

I/O Connectors

Transducer : Dual lemo-00 (Coax)
 
Mini   USB    

Power IN and TTL Alarm OUT

Power Supply  

Battery Type : Li-ion battery
 
Operating Time   Min 8 hours in typical DMS Go continuous operation
On Board Charging 
Off Board Charging with Optional Adaptor 
Proportional Battery Gauge Indicating Remaining Operation Time

Charger : “Universal” AC (100-240 V, 50-60 Hz) meets CCC, CE, UL, CSA and PSE requirements  

Measuring Range   

0.40 mm to 650 mm (0.010" to 25.00") in steel, in standard operation, depending on the probe, material and surface
 
Digital Display Resolution  

0.01 mm or 0.1 mm (0.001" or 0.01") selectable over the entire measuring range
 
Material Velocity Range  

250 to 16,000 m/s (0.0098" to 0.6299"/µs)
 
Units   

Selectable mm or inch

Measurement Techniques  

All measurments using Zero Crossing technique single element IP to 1st echo / single element multi echo / dual-element IP to 1st echo / dual element multi echo

(DMS Go TC only)   TopCoat (Patent # 6,035,717) and Auto-V

Measurement Display Modes

Temperature Corrected Thickness 
Thickness and large A-Scan 
B-Scan 
MIN / MAX Capture 
Differential

Calibration    

One-point, Two-point 
Auto or Manual On-block and Off-block Zero 
Automatic V-path Correction

Update Rate   

32 Hz in MIN/MAX-capture Mode and B-Scan Display Mode 
4 Hz or 8 Hz or 16 Hz (Selectable) in Standard Mode

Receiver    

110 dB Dynamic Range 
Automatic ain control with manual (set by user) 
High, low and Auto Gain Limit

Pulser    

Square Wave, Pulse-width and -voltage (120 V or 250 V) automatically matched to probe

Memory    

2 GB SD Card included. Up to 16 GB memory cards can be used 
Data export as PDF, XML, CSV, DAT. Jpeg screen copy

Data Recorder   

100,000 readings per file. Multiple files can be stored on SD card up to card capacity

File Formats   

6 File Formats with DR Option (3 with Base Instrument)

Attachments   

Insertion of 2x2 to 9x9 MicroGrid per Measuring Point 
1 to 16 user-definable comments for each file format with up to 16 alphanumeric characters per measuring point 
A-Scan 
B-Scan

Software


UltraMATE Lite   Simple data management program for transferring measurement data files to a PC, including integration of the data into Windows programs
 
UltraMATE   Extensive data management program for displaying and printing measurement data as graphics, for managing test data, for entering comments on files
 
Software Development Kit  Available for integration into other software applications
 

This unit is only available to end users within the EU and not for resale outside of the EU

Additional Information

Additional Accessories N/A
Product Code F25.0126

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  • Rohmann
  • Fujifilm
  • Johnson Allen
  • Chemetall
  • Magnaflux
  • Colenta
  • Tracerco
  • Gal Gage Co.
  • Tetenal
  • Radiographic Accessories Limited
  • Vertec
  • High Technology Sources Limited
  • Phoenix Inspection Systems Limited
  • AGFA
  • Wolf Safety Lamp Company
  • X-Rite
  • Balteua NDT
  • Karl Deutsch
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x